Outdoor Furniture Repair and Restoration in Shah Alam, Selangor

We Restore Your Outdoor Furniture to Its Original Condition, Not to "Almost as Good"

Weathered teak, corroded aluminium frames, sagging wicker, unravelled rope weave, mouldy cushions after monsoon season. Every single one of these problems has a fix that costs a fraction of buying new. At Samz Design, we’ve been repairing and restoring outdoor furniture for homes, hotels, resorts, and restaurants across Selangor, Shah Alam, Kuala Lumpur, and the wider Klang Valley since 2015. Every repair is built for Malaysia’s tropical climate using weather-rated materials that hold up against heat, humidity, salt air, and monsoon rain.

Bring us a single teak dining chair or a full 40-piece resort pool deck. We handle both.

Workshop in Subang, Shah Alam | Repair for Hotels & Resorts | All Materials Handled | Free Quote in 24 Hours

Berlin outdoor wicker dining set with glass top table and six chairs
WHY REPAIR INSTEAD OF REPLACE

Real Reasons to Repair Rather Than Buy New

Malaysian homeowners often assume weathered outdoor furniture has to be replaced. It rarely does. Three reasons why repair almost always wins:

Cost. A full outdoor sofa set restoration typically costs 20 to 35 percent of what a new set costs. Sanding and refinishing a weathered teak dining table runs 15 to 25 percent of the replacement price. Restringing a rope sun lounger costs a small fraction of a new lounger.

Original build quality is usually better. Furniture from 8 to 15 years ago was often built with solid hardwood frames, thicker aluminium extrusions, and denser rope than what most importers ship today. When you restore an older well-built piece, you’re preserving quality that would cost significantly more to replicate in a new piece.

Sentimental and design continuity. A dining table you bought together, a bench that has always sat in the garden, a hotel’s original poolside pieces that match the property’s design language.

Some pieces are simply worth restoring.

We repair furniture we made and furniture we didn’t. As long as the material is one we work with (teak, Balau, mahogany, aluminium, stainless steel, mild steel, viro wicker, rattan, olefin rope, upholstery material), we can restore it.

Our Repair and Restoration Services

We handle four core repair categories in our Shah Alam workshop, each with material-specific processes and equipment. All work is carried out by our own craftsmen with a written quote before any tool touches your furniture.

Craftsman welding an aluminium outdoor chair frame before powder coating

Frame Repair, Welding, and Structural Restoration

The frame is the backbone of any piece of furniture. When it fails, the whole piece is unusable. We repair:

  • Aluminium frames with corrosion, cracked welds, bent legs, loose joints, and powder coat damage. Our metal workshop welds, straightens, sandblasts, and re-powder-coats in your original colour or any RAL shade.
  • Stainless steel frames with rust spots, loose connections, or bent components. Polished back to original finish.
  • Mild steel and wrought iron frames with rust, loose welds, or paint failure. Sandblasted, treated with rust converter, primed, and repainted with weather-rated finish.
  • Wooden frame joints that have loosened, split, or separated. Re-glued, doweled, and clamped with marine-grade adhesive.

Most frame repairs are complete within 8 to 10 working days depending on the scope and finish requirements.

Craftsman sanding a weathered grey teak chair to restore its golden colour

Wood Sanding, Refinishing, and Weathered Timber Restoration

Teak and other tropical hardwoods weather to a silver-grey patina under Malaysian sun. Some homeowners love the grey look. Most want the original warm golden or honey tone back. We sand, treat, and refinish:

  • Teak to natural golden tone, grey-wash, dark walnut, or a custom stain match
  • Balau hardwood to its original honey or deep amber shade
  • Mahogany to rich red-brown tones
  • Other tropical hardwoods matched to your original finish

We can restore teak that has been left outside for 10+ years and looks beyond saving. If the wood is still structurally solid, the finish can almost always come back.

Cushion Restuffing, Reupholstery, and Upholstery Repair

Outdoor cushions fail in three ways: foam breaks down and loses support, covers fade or tear, and stitching gives out along seams. We handle all three:

  • Restuffing with high-density quick-dry foam suited to outdoor use (drains water, resists mould)
  • Recovering with weather-rated fabric including performance Olefin, Sunbrella-grade textiles, and marine vinyl
  • Restitching loose seams, damaged corners, and worn zips
  • Custom cover fabrication if you want a completely new colour or fabric to refresh the look without buying new cushions

We stock a full range of outdoor fabric colours and can order custom Pantone-matched fabric for hotel and resort projects. See our dedicated cushion cover and upholstery service for full details.

Wicker and Olefin Rope Re-Weaving

Weave failure is the most common issue on outdoor sofa sets, chairs, and loungers after 3 to 8 years of use. We restring and rewire:

  • Viro synthetic wicker with matching diameter and colour where possible
  • Natural rattan re-weaving for indoor and covered outdoor pieces
  • Olefin rope re-weaving on aluminium frame pieces (sun loungers, daybeds, dining chairs, sofa sets)
  • Section-by-section repair for pieces where only part of the weave has failed, saving cost versus full restringing

Rope and wicker repairs typically take 7 to 14 working days depending on the piece and complexity. Full restringing of a large daybed like a 180 cm round Linea-style piece runs 10 to 14 days.

Two Ways We Deliver Repair Service

How Our Furniture Repair and Restoration Service Works

All repair and restoration work at Samz Design is carried out at our Subang workshop. This applies to every client, whether you are a homeowner sending in a single dining chair or a resort sending in fifty poolside sun loungers.

We do not offer on-site repair visits. This is a deliberate decision, not a limitation. Our workshop in Subang is fully equipped with welding stations, sanders, finishing tools, powder coating equipment, and the full range of materials we use in production. Repair work done in a fully equipped workshop produces a better result than anything possible on-site. That standard matters to us, so we keep all work in-house.

How the process works:

You arrange transport of your furniture to our Subang workshop. We assess the pieces, confirm the scope and cost with you before starting, complete the repair or restoration, and notify you when the work is ready for collection. You arrange collection from our workshop.

For homeowners:
Drop your piece off at our Subang location or arrange your own transport. We handle single chairs, dining sets, outdoor sofas, and anything in between. Repair timeline and cost are confirmed before any work begins.

For hotels, resorts, restaurants, and commercial properties:
Send your furniture in batches so your operations continue running. We complete and return the first batch before you send the next. All logistics, including transport to and from our workshop, are handled on your side.

Clients send furniture to our workshop from across these areas:
Shah Alam, Subang, Petaling Jaya, Damansara, Kuala Lumpur, Puchong, Sunway, Kajang, Klang, and the wider Klang Valley. Outstation clients are welcome to contact us to arrange logistics.

Why Choose Samz Design for Furniture Repair in Malaysia

Real Workshop, Real Craftsmen

Our repair work happens in our Shah Alam workshop with full welding equipment, metal fabrication tools, wood sanding and refinishing stations, and upholstery facilities. Most Malaysian furniture repair services are one or two people working out of a van. We have a proper facility with the equipment to handle any material, any scale.

We Work On Furniture We Didn't Make

The vast majority of our repair clients did not originally buy from us. As long as the material is one we work with (and we work with all major outdoor furniture materials), we can restore it. No brand loyalty required.

Fixed Quote Before We Start

We inspect first, quote fixed pricing based on the actual work needed, and only start once you approve. No “sudden discovery” surcharges partway through the job. What you see in the quote is what you pay.

Local Service, International Standards

Based in Subang, Shah Alam with fast turnaround across Selangor and KL. Same quality standards we use for our export projects to Singapore, UAE, Qatar, Bahrain, Saudi Arabia, UK, and US.

Sustainable Choice

Restoring existing furniture keeps quality pieces out of landfills and reduces the demand for new tropical hardwood harvesting. See our full sustainability commitment.

Materials Selected for Malaysian Climate

Every material we use in a repair (sealants, foam, fabric, powder coat, rope, adhesive) is specifically rated for Malaysian humidity, sun exposure, and monsoon conditions. See our full material guide for details.

Our 6-Step Repair and Restoration Process

We designed this process to eliminate the two things that go wrong with most furniture repair jobs in Malaysia: unclear pricing and unclear timelines.

Step 1: Send Photos via Form or WhatsApp

Snap a few photos of the furniture showing the damage clearly, and send them via our repair form below or WhatsApp us on +60 17-689 0841. Include a count of pieces 

Step 2: Free Inspection and Written Quotation

Within 24 hours, we review your photos and send back a written quotation with fixed pricing and a suggested timeline. For commercial jobs of 20 pieces or more, we arrange a free on-site inspection instead of quoting from photos alone.

Step 3: Pickup or On-Site Scheduling

Once you approve the quote, schedule a pickup from your home to our workshop in Subang.

Step 4: Repair Process in Workshop

Our craftsmen carry out the full repair using the materials and finishes specified in your quote. Frame welding, wood sanding, refinishing, upholstery, and re-weaving all happen in a single coordinated workflow rather than being handed to separate subcontractors.

Step 5: Quality Check Before Delivery

Before any piece leaves the workshop (or before we finish on-site), our senior craftsman inspects the work against the original quote scope. Anything not up to standard gets reworked before you see it.

Step 6: Delivery and Installation

After the workshop job is finished a confirmation is sent to customer to schedule pick up from store. For furniture that needs assembling, the customer can order our Assembly Service.

Realistic Repair Cost Ranges

Charges are calculated on the base of actual damage done to a furniture piece so, its difficult to quote upfront, . However, here are indicative ranges so you know roughly what to expect before you request a quote. Final pricing is always confirmed after  analyzing provided images

Repair Type
Indicative Starting Range
Single teak dining chair sanding and refinishing

RM low to mid range

Full teak dining table refinishing (6-8 seater)

RM low to mid range

Teak Side Table and Benches

RM low range

Aluminium. stainless Steel frame welding and re-powder-coating (single piece)

RM mid to high range

Outdoor cushion restuffing and recovering (per cushion)

RM low to mid range

Rope re-weaving on a sun lounger

RM mid range

Cushions Repair

RM low range

Rope re-weaving on a large daybed

RM mid to high range
Full outdoor sofa set restoration (frame + weave + cushions)
RM high range

Batyline Changes for Seats

RM mid to high range

Hotel FF&E restoration project (per piece)
Volume-adjusted quote

Materials We Work With in Repair

We handle repair and restoration on every material we manufacture with and several more:

Wood: Teak, Balau, Mahogany, and other tropical hardwoods

Metals: Powder-coated aluminium, stainless steel 304, mild steel, wrought iron

Weaves: Viro synthetic wicker, natural rattan, olefin rope, PE rattan

Textiles: Olefin outdoor fabric, Sunbrella-grade performance textiles, marine vinyl, quick-dry cushion foam

Adhesives and Finishes: Marine-grade adhesives, weather-rated sealants, teak oil, RAL-matched powder coating

See the full breakdown on our material guide.

Service Areas for Furniture Repair in Malaysia

How Furniture Repair Works at Samz Design

All repairs at Samz Design are carried out exclusively at our Shah Alam workshop. We do not offer on-site repair services at your home, office, hotel, or any other location. Customers and businesses across Malaysia arrange transportation of their furniture to our workshop and collect it once the repair is complete. We handle everything in between.

We Accept Furniture from Across Malaysia

Whether you are based in the Klang Valley or sending from outstation, the process is the same. You arrange delivery of your furniture to our Shah Alam workshop. We carry out the full repair, restoration, or refinishing on-site here. You then arrange collection or return freight once the work is done.

Customers in Shah Alam, Subang, Petaling Jaya, Damansara, Kuala Lumpur, Puchong, Sunway, USJ, Kajang, Klang, Port Klang, and Rawang typically drop off and collect directly. Customers from Ipoh,

Related Services

Shop for replacement pieces if repair isn’t the right call:

Frequently Asked Questions About Furniture Repair in Malaysia

Yes. The vast majority of our repair clients did not originally buy from us. As long as the material is something we work with (teak, Balau, mahogany, aluminium, stainless steel, viro wicker, rattan, olefin rope, or standard upholstery fabrics), we can carry out the repair. There’s no requirement for the piece to have been manufactured by us.

Both. For most residential jobs, we collect the furniture and bring it to our Subang workshop where we have the full range of tools, welding equipment, sanding stations, and finishing supplies. For hotels, resorts, and large commercial properties where moving furniture is impractical, we send a team on site to carry out repairs in place. We’ll recommend the best option based on your specific situation after reviewing your photos and on site prior assessment. 

WhatsApp us photos of the furniture with a brief description of the issue and the quantity of pieces involved. For commercial jobs of 15 pieces or more, we arrange a free on-site inspection so we can assess everything in person. Once we’ve evaluated the scope, we send a detailed written proposal with fixed pricing and a suggested timeline.

In most cases, yes. For teak, we can refinish to natural golden teak tone, grey-wash, dark walnut, or a custom stain match. For Balau and other tropical hardwoods, we aim to match the original stain as closely as possible. If you have an old photo showing the piece when it was new, sharing that with us dramatically improves our ability to nail the finish exactly.

Yes. Teak, Balau, and other tropical timber pieces that have faded to silver-grey from years of sun and rain can almost always be sanded and refinished back to their original colour. As long as the wood is still structurally solid (no rot, no deep cracks through the grain), we can bring the finish back. We’ve restored 15-year-old teak furniture that looked beyond saving.

Yes. We handle rusted mild steel, corroded aluminium, and stained stainless steel through structural welding, sandblasting, rust treatment, primer application, and refinishing (powder coating for aluminium, marine-grade paint for steel). Structurally compromised frames are welded back to safe condition before finishing.

Most residential jobs are complete within 7 to 14 working days from pickup, depending on scope. A single teak chair refinish takes 5 to 7 days. A full outdoor sofa set restoration takes 10 to 21 days. Large hotel and resort jobs are scheduled by project with a clear written timeline.

Urgent turnaround is possible for smaller jobs on request.

Repair pricing depends on the material, extent of damage, and scope of work. As a rough guide, single-piece repairs typically start in the low to mid RM hundreds range, full set restorations run into the mid RM thousands, and hotel FF&E projects are quoted per piece with volume discounts. Every quote is fixed before we start, and we send it within 24 hours of receiving your photos.

We collect it. Pickup is included in our workshop repair quote for anywhere in the Klang Valley. For outstation pickup (Ipoh, Malacca, Johor Bahru, Penang, etc.), a small transport fee applies which we confirm upfront in the quote.

For pieces originally built with solid materials (real teak, thick aluminium, good hardwood, quality upholstery), repair almost always makes financial sense. Restoration typically costs 20 to 35 percent of the price of an equivalent new piece, and older well-built furniture is often higher quality than what most importers ship today. For cheap flat-pack or heavily damaged pieces where the frame is compromised, replacement may be the better call. We’ll give you an honest recommendation as part of the quote.

Yes. Rope re-weaving is one of our most-requested services, especially for pieces from our own rope furniture collection and equivalent imported pieces. We match the rope diameter and colour

where possible, and can also restring in a different colour if you want to refresh the look at the same time.

Yes. Restuffing with high-density quick-dry outdoor foam is a common repair. We can also replace covers at the same time if the original fabric is faded or damaged. Full details on our cushion cover and upholstery service.

Free pickup and delivery across the Klang Valley: Shah Alam, Subang, PJ, Damansara, KL, Puchong, Sunway, Kajang, Klang, and Rawang. Outstation pickup available on request for anywhere in Peninsular Malaysia. On-site commercial repair across Malaysia for hotels, resorts, and F&B properties, including Langkawi, Penang, Port Dickson, and Desaru.

No. For hospitality clients with large outdoor furniture inventories, we offer one time scheduled maintenance service on agreed terms and conditions.

Yes we can change table legs , TV console and sideboard’s base frames to stainless steel or powdered coated metal

Repair and Maintenance Form

None

Ready to Restore Your Outdoor Furniture?

Send us photos of your furniture and we’ll come back with a fixed quote within 48 hours. Whether it’s a single teak dining chair or a full hotel pool deck, we handle it in-house from inspection to final delivery.

WhatsApp: +60 17-689 0841

Workshop and showroom: No. 13 Jalan U3/3 (BK), Pusat Perniagaan Subang, 40150 Shah Alam, Selangor