Can't Find Furniture That Fits? We Build It.
Off-the-shelf furniture is made for an average room you do not live in. We make yours to the exact centimetre, in your choice of material and finish, from our own workshop in Shah Alam.
Send us a sketch, a photo, or just the measurements of your space. That is all it takes to start. We work with homeowners across the Klang Valley and take on full project orders for hotels, resorts and cafes, and because our metal furniture is fabricated in-house, you deal with the maker, not a middleman.
Exact size. Exact material. Exact finish.
The Furniture That Fits the Wall Never Fits the Room
You have measured the space three times. The sofa deep enough to actually relax on blocks the walkway. The dining table that seats your whole family is 20 cm too long for the room. The TV console you liked online comes in one width, and it is the wrong one. Or you have a balcony shaped like nothing any catalogue was ever built for.
Every homeowner in Malaysia hits this wall eventually. Standard sizes are a compromise, and you end up paying good money for furniture that almost works.
Custom furniture removes the compromise. At Samz Design, custom made furniture is not a side service we tack on. It is the core of what we do. We design and build indoor and outdoor pieces to your precise size, material and finish, whether that is one statement piece for your living room or two hundred matching pieces for a hotel fit-out. Metal is fabricated in our Shah Alam workshop. Teak, wood and rattan are handcrafted by partner craftsmen in Indonesia we have trusted for years.
Choose Everything, Down to the Last Detail
With a catalogue you take what you are given. With us, nearly every part of the piece is your decision.
Design.
A sketch, a screenshot, or a description in your own words. We turn it into a real, buildable piece.
Size.
Built to your exact measurements, including the awkward corners and odd footprints that shop furniture never fits.
Frame material.
Powder-coated aluminium, stainless steel or mild steel, plus A-grade teak, balau, rubber, pine, mahogany and nyatoh wood.
Weaving.
Olefin rope, Viro synthetic wicker or natural rattan, woven to survive sun and rain.
Finish and colour.
Powder-coat colours, wood stains and tones, and your pick of fabric, PU or PVC upholstery.
Top material.
Sintered stone, marble, solid wood, aluminium or glass, chosen for how the piece will be used.
From a Rough Idea to Finished Furniture in Five Steps
You do not need a technical drawing or a designer’s eye to begin. Most of our projects start with a phone photo and a set of measurements. Here is exactly what happens next.
Tell us what you need
Send a sketch, a reference photo, or the dimensions of your space, along with how you plan to use the piece and where it will live. Rough notes are completely fine. This is a conversation, not a form you need to get perfect.
Design and material consultation
We talk through layout, materials and finishes to match your space, your budget, and how much sun and rain the piece will actually take. You get straight advice on what will last in the Malaysian climate, not an upsell.
Design proposal with real pricing
You receive detailed sketches or 3D visuals with accurate measurements, material options and clear, itemised pricing. Nothing gets built until you approve it, and the price you approve is the price you pay.
We craft your furniture
Metal frames are welded, powder-coated and quality-checked in our own Shah Alam workshop. Teak, wood and rattan pieces are handmade by our Indonesian partner craftsmen. Either way, it is built for the tropics from day one.
Delivery and installation
We deliver your finished piece and install it on-site where needed, so it arrives ready to use with a clean, perfect fit. No flat-pack, no guesswork, no missing screws.
The Right Material Matters More Outdoors, and We Are Honest About Ours
Anyone can promise durability. Fewer will tell you where their materials actually come from. We will.
Our powder-coated aluminium furniture, stainless steel and mild steel frames are welded, finished and quality-checked in-house by our own team in Shah Alam. That full control over the build is the reason we can offer genuine custom metal furniture instead of modified stock, and the reason our frames stand up to heat, humidity and rain without rusting or fading.
Our teak, balau and wooden furniture pieces, along with our rattan and wicker furniture, are crafted by specialist partner craftsmen in Indonesia, people we have worked with for years who genuinely understand natural materials. You get their skill in wood and weaving alongside our metal fabrication and finishing under one roof.
For seating, we add Olefin rope furniture and a full range of outdoor-grade upholstery, every option chosen to handle the Malaysian climate. If you want to compare materials before you decide, our full material guide breaks down each one and where it works best.
The Custom Pieces People Ask Us For Most
Almost anything can be made to order, but a handful of requests come up again and again. If yours is on this list, we have built dozens like it.
Sized to your exact wall width, with storage and cable routing planned around the devices you actually own.
Built to fill your wall in the right proportion, in teak, rattan or a mix, for dining rooms, living rooms and hallways.
Made to standard or non-standard mattress sizes in solid teak and upholstered finishes.
Sofa sets, sun loungers, daybeds and dining sets built to fit your balcony, poolside or garden exactly.
Aluminium, stainless steel and mild steel pieces fabricated entirely in-house, the work we control from first cut to final finish.
For Your Home, or for a Whole Venue
For homeowners, we build pieces that fit the balcony, poolside or living room you actually have, not the one a catalogue assumes. If you live in a condo or a home with an awkward layout, custom is often the only way to use your space properly instead of working around furniture that does not fit.
For businesses, we take on project and bulk orders for hotels, resorts, restaurants, cafes, property developers and interior designers across Selangor, Kuala Lumpur and the wider Klang Valley. If you are specifying furniture for a fit-out, we carry one design language across the entire venue and produce it in the quantities the project needs, on a timeline you can plan around. See our B2B solutions and project fabrication for larger orders.
We supply clients across Malaysia and internationally, which matters when you are placing a larger custom or contract order and need a maker you can actually rely on to deliver.
Five Reasons Customers Choose Us Over a Catalogue
Manufacturer-direct for metal.
You deal with the people who build it, not a reseller. Cleaner pricing, clearer communication, no games.
In-house metal workshop.
Full control over welding, finishing and quality in Shah Alam. This is what genuine custom actually means.
Honest sourcing.
Metal is ours. Wood and rattan come from specialist Indonesian partners, and we say so plainly.
Built for the tropics.
Every material and finish is chosen for Malaysian heat, sun, humidity and rain, not a European showroom.
3-year warranty.
Eligible products for domestic use are covered against structural and manufacturing defects.
Custom Furniture FAQs
Ready to Stop Settling for Almost-Right?
The piece you have been picturing does not exist in any shop, because it was only ever going to fit your space. Let us build it. It starts with a sketch, a photo or a measurement, and one message to our team.
+60 17-689 0841
admin@samzdesign.com
NO. 13 Jalan U3/3 (BK), Pusat Perniagaan Subang, 40150 Shah Alam, Selangor
