Beds

A bed frame is the one piece of furniture you use every single night for the next ten years, and it is the piece most people rush. They order a frame online, it arrives, and then the problems start. The mattress does not sit flush because the frame was built to a different country’s sizing. The slats sag in the middle within a year. The headboard rocks against the wall. Or the whole thing swells and stops closing properly after the first humid season.

At Samz Design we build bed frames to order in solid teak wood and upholstered finishes, sized to Malaysian mattress dimensions exactly, not approximately. Whether you need a king frame for a landed home in Shah Alam, a super single for a condo bedroom in Petaling Jaya, or forty matching frames for a hotel fit-out, we build it to the measurement you actually need. Browse the full bedroom furniture range, or read on for what separates a bed frame that lasts from one that does not.

 Get a Custom Bed Frame Quote 

Malaysian Bed Frame Sizes: Get This Right First

A bed frame must match your mattress to Malaysian sizing, not US or UK sizing, or you will be left with a visible gap or an overhang.

This is the single most common and most expensive mistake buyers make. A Malaysian queen mattress is not the same as an American queen. Order an imported frame and the numbers will not line up. Here are the standard Malaysian mattress sizes to build around:

Size Dimensions Best for
Single 91 x 191 cm Children’s rooms, guest rooms, small second bedrooms
Super Single 107 x 191 cm One adult with more room; teen rooms and studio units
Queen 152 x 191 cm The default for main bedrooms in most Malaysian condos
King 183 x 191 cm Master bedrooms in landed homes and larger condo units
Custom Your measurement Non-standard rooms, taller sleepers, hotel specifications

One more measurement people forget: floor clearance. A king frame at 183 cm wide needs a bedroom around 3.5 metres wide to leave a comfortable 50 to 60 cm walkway on each side. If your room is tighter than that, a queen or a custom-width frame will serve you far better than squeezing in a king you have to edge around every night. Tell us the room dimensions and we will advise honestly, even when that means recommending the smaller frame.

Why Solid Teak Is the Right Bed Frame Material in Malaysia

Bedroom humidity in Malaysia sits high year-round, and most bedrooms cycle between air conditioning at night and open, humid air by day. That constant swing is brutal on the wrong material.

Engineered board and cheap softwood absorb that moisture through their cut edges, swell, and loosen at the joints. Within a year or two you get the creak, then the wobble, then the frame that never quite feels solid again. Solid teak behaves completely differently. Its natural oil content resists moisture from inside the grain, so it does not swell or warp with the seasons, and it grips screws and dowels properly so the joints stay tight under nightly load. It also resists insects, which matters more in a tropical climate than most people realise. See the full wooden furniture range and our material guide for how each timber performs here.

Teak also ages the right way. Rather than looking tired after five years, it deepens into a warmer golden-brown patina. A properly built teak bed frame is genuinely a twenty-year piece, which changes the arithmetic completely against a frame you replace twice in that time.

Our Bed Frame Collection

We build nine bed frame designs, spanning solid teak, upholstered and canopy styles. Every one is available in custom sizes and finishes.

Solid teak bed frames

The Samz Teak Wood Bedframe is our core A-grade teak frame, available in king, queen, super single and single. The Classic Teak Wood Bedframe adds a vertical reeded headboard for texture and a more traditional presence. The Kiara Teak Wood Bedframe takes the opposite approach with a low Japandi platform silhouette, which suits minimalist bedrooms and makes a smaller room feel more open. The Rose and PJ Teak Wood Bedframes sit between the two, with cleaner designer lines and the natural warmth of solid teak.

Upholstered and combination bed frames

The Rumi Teak Wood Upholstered Bedframe pairs an A-grade teak frame with a soft fabric headboard, giving you the durability of teak and the comfort of something you can lean back against to read. The RMI Upholstered Bedframe offers the same combination with custom size, fabric and finish. The KK Upholstered Divan Bed Frame is built on a solid wood base with premium fabric, a 125 cm headboard and an 8-inch divan base, in four sizes, with pet-friendly fabric available. Browse related upholstered furniture for matching pieces.

Canopy and statement frames

The KD Upholstered Canopy Bed Frame is our statement piece, built on a powder-coated metal frame fabricated in house at our Shah Alam workshop, with an upholstered headboard. At 193 x 203 x 200 cm it creates a genuine focal point, and it is a favourite for luxury bedrooms and hotel suites. See the wider powder-coated aluminium furniture range for the metal work we do.

  Customise Your Bed Frame Size and Finish 

How to Choose the Right Bed Frame

Four questions get you to the right frame, in this order.

  • What mattress size do you have, or plan to buy? Match the frame to Malaysian sizing exactly. This is non-negotiable.
  • How wide is the room? Leave 50 to 60 cm of walkway on each side. If the numbers do not allow a king, a custom width often solves it better than dropping a full size.
  • Do you read or sit up in bed? If yes, an upholstered headboard like the Rumi or RMI is far more comfortable than solid timber against your back.
  • Do you need the room to feel bigger? A low-profile platform frame like the Kiara opens up sight lines in a compact condo bedroom. A tall canopy or reeded headboard does the opposite and creates presence in a large room.

Bed Frames for Hotels, Resorts and Property Developers

A hotel bed frame takes more punishment in one year than a home frame does in five. Housekeeping moves it, luggage knocks it, and it is in service every night with no rest periods. This is exactly where engineered board fails and solid construction pays for itself. We supply matched bed frames in project quantities for hotels, resorts, serviced apartments and property developers across Malaysia and internationally, with consistent finish across every unit and sizing built to your specification. Our B2B solutions and hotel furniture supplier service handles the full order, and our custom design team can work directly from an interior designer’s drawings.

Complete the Bedroom

A bed frame sets the tone, and the rest of the room should agree with it. Pair yours with matching bedside tables in the same teak and finish, a chest of drawers or wardrobe for storage, a dressing table, or a separate headboard if you are keeping an existing base. Because everything is made to order, we can match timber, stain and fabric across the whole room so it reads as one set rather than pieces bought separately.

  Plan a Full Bedroom Set With Our Team 

Bed Frames Malaysia: Frequently Asked Questions

What are the standard bed frame sizes in Malaysia?

Malaysian standard mattress sizes are Single at 91 x 191 cm, Super Single at 107 x 191 cm, Queen at 152 x 191 cm and King at 183 x 191 cm. Your bed frame must be built to match these exactly. Do not pair a US or UK sized frame with a Malaysian mattress, because the dimensions differ and the gap or overhang will be visible. Samz Design builds to Malaysian sizing as standard, and to custom dimensions on request.

Is a teak bed frame worth it in Malaysia?

Yes, and the climate is the main reason. Teak’s natural oils resist moisture from inside the grain, so it does not swell, warp or loosen the way engineered board does through Malaysia’s humidity cycles. It also resists insects and holds fasteners firmly, so the frame stays solid under nightly use. A well-built teak frame comfortably lasts two decades, which usually makes it cheaper over time than replacing a lower-cost frame twice.

Can you build a bed frame to a custom size?

Yes, and it is one of our most common requests. We build to your exact width, length and height, which is useful for non-standard rooms, taller sleepers who want extra length, or hotel specifications. Custom sizing is how we normally work rather than a special add-on. Send your measurements through our custom design service for a quote.

What size room do I need for a king bed frame?

A king frame at 183 cm wide works best in a bedroom around 3.5 metres wide or more, so you keep roughly 50 to 60 cm of walkway on each side. In a narrower room, a queen frame or a custom-width frame will feel far more comfortable to live with. Tell us your room dimensions and we will recommend honestly, including when the smaller option is the better choice.

Do your bed frames need a box spring or divan base?

Our platform-style teak frames support a mattress directly on slats, so no box spring is needed. Modern latex, memory foam and hybrid mattresses are designed for slat support. If you prefer the height and feel of a divan, the KK Upholstered Divan Bed Frame is built on an 8-inch divan base. We advise on which suits your mattress type at the quote stage.

Which bed frame is best for a small condo bedroom?

A low-profile platform frame such as the Kiara Teak Wood Bedframe works best in a compact bedroom, because the lower silhouette keeps sight lines open and makes the room feel larger. A super single at 107 x 191 cm is also worth considering for a single occupant or a second bedroom, as it frees up meaningful floor space compared with a queen.

Can I get a bed frame and bedside tables in matching teak?

Yes. Because we build to order, we match timber, stain and finish across the bed frame, bedside tables, wardrobe and dressing table so the bedroom reads as one coordinated set. Just tell us at the quote stage which pieces you want matched.

Do you supply bed frames to hotels and resorts in Malaysia?

Yes. We supply matched bed frames in project quantities to hotels, resorts, serviced apartments and property developers, with consistent finish across every unit and sizing built to specification. Our B2B solutions service manages the order end to end, working from your drawings or ours.

How long does a custom bed frame take, and do you deliver?

Lead time depends on the design, timber and finish, and we confirm a realistic timeline before you approve the order. We deliver nationwide across Malaysia and ship internationally to Singapore, the UAE, Qatar, Bahrain, Saudi Arabia, the UK and the US. Contact us for a delivery quote to your location.

Order Your Bed Frame

Whether you are furnishing a master bedroom, a condo, or an entire hotel floor, Samz Design builds bed frames that fit your mattress exactly and hold up to Malaysia’s climate. Visit our Shah Alam showroom to see the teak in person, or request a quote to get started.

WhatsApp: +60 17-689 0841   |   Email: admin@samzdesign.com   |   Showroom: NO. 13 Jalan U3/3 (BK), Pusat Perniagaan Subang, 40150 Shah Alam, Selangor

  Request Your Bed Frame Quote Today 

CATEGORIES

Showing all 9 resultsSorted by popularity

The Classic Teak Wood Bedframe is handcrafted from premium A-Grade teak wood and features a unique vertical reeded headboard and bed base. Designed for modern and luxury bedrooms, it offers lasting durability, natural beauty, and custom size, material, and colour options.

Japandi platform bed frame designed by Samz Design in Shah Alam. A low, minimalist solid teak platform bed with a smooth premium finish. Available in Single, Super Single, Queen and King. Custom sizes available. Designed by Samz Design — request a quote today.

Upholstered divan bed frame designed by Samz Design in Shah Alam. A solid wood frame with premium pet-friendly, easy-clean fabric, a 125 cm headboard and an 8-inch divan base. Available in four sizes. Designed by Samz Design — request a quote today.

The PJ Teak Wood Bedframe brings natural warmth and timeless style to your bedroom. Crafted from premium teak wood Malaysia, it offers exceptional strength, beautiful wood grain, and long-lasting durability.

Upholstered wooden bed frame designed by Samz Design in Shah Alam. Solid teak with a soft, upholstered headboard, made to standard Malaysian mattress sizes. Customisation available for size, fabric and finish. Designed by Samz Design — request a quote today.

Designer teak bed frame designed by Samz Design in Shah Alam. Solid teak with a refined, elegant silhouette, made to standard Malaysian mattress sizes. Customisation available. Designed by Samz Design — request a quote today.

Upholstered teak bed frame designed by Samz Design in Shah Alam. A-grade teak with a soft, upholstered headboard in indoor fabric, made to standard Malaysian mattress sizes. Customisation available. Designed by Samz Design — request a quote today.

Solid teak bed frame designed by Samz Design in Shah Alam. A-grade teak with a warm natural finish, in King, Queen, Super Single and Single to fit standard Malaysian mattresses. Customisation available. Designed by Samz Design — request a quote today.

Upholstered canopy bed built in house by Samz Design in Shah Alam. A sturdy powder-coated metal frame with a soft upholstered headboard for luxury bedrooms and hotels. Size: 193 × 203 × 200 cm, customisation available. Built in house in Malaysia — request a quote today.